CoviSec

The IK-WR01A combines a rugged vandal-resistant design with hybrid network/analog capabilities to meet the needs of schools, prisons, stadiums, outdoor public places and other areas subject to vandalism.

Pick-up Element	I/3 in. Interline Transfer CCD
Effective Picture Elements	771 (H) x 492 (V) (380K)
Resolution	480 TVL Horizontal (NTSC out)
Minimum Subject Illumination	0.2 lux @ F1.0
Lens Vari Focal	f=3.0 - 8.0 mm F1.0
Iris Control	Auto Iris Lens (DC)
White Balance	2500-10,000K
Backlight Compensation	Center-Bottom (DIP-SW)
S/N Ratio	50 dB
Maximum Image Size	VGA, QVGA, QQVGA
Frame Rate	640 x 480 = 22 frames per second 320 x 240 = 30 frames per second 160 x 120 = 30 frames per second
Image Compression Method	M-JPEG
Protocols	TCP/IP, UDP/IP, FTPc, FTPs, DHCPc, HTTP, DNS, DDNS, ARP, IMCP, SMTP, POP3, RNCP
Ethernet Port	RJ45
Ethernet Connection	10/100BASE-TX
Video Output	VBS (1.0 Vp-p, 75ohm unbalance, BNC)
Video Format	NTSC, 2:1 Interlace
Sync System	Line-Lock/Internal (DIP-SW)
Shutter Cotnrol	AES (1/60 to 1/100,000 sec.)
Waterproof and Dust Rating	IP66
Ambient Temperature	14 deg. F to 122 deg. F (-10 deg. C to +50 deg. C)
Camera Mounting Method	Flush, Ceiling (Flush Mounting Base is Included)
Power Supply	AC 24 V 60Hz, DC 12 V, PoE
Power Consumption	4 W
Dimensions	Camera: 6.7 in. (W) x 5.8 in. (H); with Bracket: 6.9 in. (W) x 6.1 in. (H)
Weight	Camera: 2.9 lbs., Mounting Base: 1.3 lbs.
Auto-Iris Lens Support	DC/Video, 4 Pin Connector
Standards	UL2044/cUL, FCC, Class A
Accessories Included	Mounting Base, Screws, Clear Dome Cover, Special Hex Wrench, Manual, RJ45 In-line Coupler, Monitor Out Harness Wire, Power Connector, CD-ROM