| Features
Camera Specifications
Image Pick-up Device : 1/4" Interline Transfer CCD
Zoom Magnification : 27x Optical Zoom, 10x Digital Zoom (Max 270x Zoom)
Day & Night Function
Various Focus Mode : Auto-Focus / Manual Focus / Sem-Auto Focus
Each Preset has its own video configuration, label, relay output setting values, you can adjust each Preset setting independently
Powerful Pan/Tilt Functions
Max. 360 degrees/sec high speed Pan/Tilt Movement
Using Vector Drive Technology, Pan/Tilt motions are accomplished in a shortest path. As a result time to target view is reduced significantly and the video on the monitor is very natural to watch
For jog operation using a controller, since ultra slow speed 0.05 deg/sec can be reached, it is very easy to locate camera to desired target view. Additionally it is easy to move camera to a desired position with zoom-proportional pan/tilt movement.
Preset, Pattern, Swing, Group, Privacy Mask and More...
Max. 127 Presets are assignable and characteristics of each preset can be set up independently, such as White Balance, Auto Exposure, Label and so on.
Max. 8 set of Swing action can be stored. This enables to move camera repetitively between two preset positions with designated speed.
Max. 4 of patterns can be recorded and played back. This enables to move camera to follow any trajectory operated by joystick as closely as possible.
Max. 8 set of Group action can be store. This enables to move camera repetitively with combination of Preset or Pattern or Swing. A Groupo is composed of max. 20 entities of Preset/Pattern/Swings.
Privacy Masks are assignable, not to intrude on other's privacy. (8 Privacy Zones)
PTZ(Pan/Tilt/Zoom) Control
With RS-485 communication, max.255 of cameras can be controlled at the same time
Pelco-D, Pelco-P, Samsung or Panasonic can be selected as a control protocol in the current version of firmware.
OSD(On Screen Display) Menu
OSD Menu is provided to display the status of camera and to configure the functions interactively
The information such as camera ID, Pan/Tilt Angle, Alarm input and Preset can be displayed on screen
Alarm I/O Functions
4 alarm sensor inputs & 2 relay outputs are available
To reject external electric noise and shock perfectly, alarm sensor input is decoupled with photo coupler & relay output type
The signal range of sendor input is from DC 5.0 to 12.0 volts & relay output is max. 250VAC, 3A or 28VDC, 3A to adopt various applications.
If an external sensor is activated, camera can be set to activate when it shifts to the preset position
Reserved Presets for Special Purpose
- Most camera characterisitics can be set up easily and directly with reserved preset, not entering into OSD menu.
|
